Dispensers

Pneumatic Dispenser

Part#: 71906, 75490

Pneumatic adhesive dispensing unit with digital time/pressure display.

Features

• Digital time/pressure display.
• Foot-operated adhesive dispenser.
• Timed or steady modes of operation.
• Vacuum control keeps thin fluids from dripping between cycles.
• Optional electric finger switch (P/N 75490) available to order with pneumatic dispenser.

High Precision Dispenser with Optimeter

Part#: 73006

Includes controls and settings to electronically change/adjust dispensing time, pressure and vacuum. Consists of an auto-increment feature to adjust dispensing parameters after a certain number of shots or a specific lapsed time and auto-sequence mode that allows deposit patterns to be repeated automatically.

Features

• 400 individual memory storage cells.
• Scroll or select cells via front panel keypad or external PC/PLC control.
• Switch between steady, timed and teach modes.
• Front panel manual cycle key.
• Teach function.
• Multi-level operator lockout.
• Alarm indicators.
• End of cycle feedback loop.
• Soft button data input 0-9 keypad.
• Operator control of LCD display brightness.
• Easy up/down arrow key navigation.
• External PC interface for data input.
• Display cycle counter.
• RS-232 communication capability.
• ESD safe via connection with external ESD.
• 0-100 psi (0-6.9) bar air regulation range.
• D-sub I/0 (15-pin) and communication (9-pin) connections.
• Alarm I/0 signals.

Manual Plunger

Part#: 74000

Plunger fits into 30 cc adhesive tubes for dispensing by hand

Optimeter

Part#: 75500

Specifically designed to provide greater control when dispensing adhesives by automatically increasing airflow as the syringe barrel empties.

Features

• Blue 6 ft (1.8 m) hose.
• Included with the high precision dispenser (P/N 73006) to operate dispenser using 30 cc adhesive tubes.
• Increases accuracy and consistency through precise mechanical regulation.

Dispenser Adapter Assembly

Part#: 75880

Adapter fits onto 30 cc adhesive tubes for dispensing with pneumatic dispensers.

Features

• Blue 6 ft (1.8 m) hose.
• Required in order to operate all automated dispensers using 30 cc adhesive tubes.
• Designed with a positive safety locking action to prevent accidental disengagement, adapters are easy to install and remove.
• Each adapter assembly is precision molded for secure attachment to the adhesive tube with minimal effort, making its connection to the air output of a fluid dispensing unit fast and seamless.

5 Gallon Pail Dispenser

Part#: 77707

For efficient unloading of BlueGrip workholding adhesive into smaller liters. Highly efficient unloading for one component material, using durable components, and wear resistant coatings.

• Single-post unloader
• Manual bulk filling station
• Use to fill 1L cartridges

Features

• Dispensing Consistency – Fast air motor changeover with rapid-cycling, dual air-piloted cylinder provides uniform material output and consistent material pressure.
• Ease of Operation – Simple and intuitive front facing pneumatic controls that feature auto shutdown to prevent damage to the unit when the pump reaches the bottom of the container.
• Minimize Waste – Unique plunger seal design and low waste follower reduce the risk of costly material waste/loss due to leakage and/or unused material remaining in the pail.
• Speed of Maintenance – Removable packing gland provides fastest repair in industry, without having to remove the pump from the line.
• Production Efficiencies – Interchangeable follower plate and seal design reduce wasted material and lengthy changeover procedures.
• Safety Compliance – Tapered solvent cup and finger safe design for CE compliance.
• Easy Pail Changeover – Pail hold down feature facilitates ease of container changeover procedure, preventing movement when the follower is withdrawn.
• Pail Protectors (P/N 48006) – Optional pail protectors to extend seal life and reduce clean-up of BlueGrip workholding adhesive. To be inserted between the dispenser follower plate and the adhesive in the pail.

Product Specifications

• Height 54.5 inches
• Depth 19 inches
• Width 25 inches
• Dry Weight 230-260 lb
• Air inlet connection 1/2 inche NPT
• Material outlet size connection -12 SAE

Automated recommendations available upon request.

Contact us for help selecting the best adhesive dispensing equipment for your application.

Syringe and Cartridge Barrels

Part#: 43402, 46402

UV blocking barrels block UV light, while allowing fluid levels to be monitored.

Part #: 43402 – 30 cc amber syringe barrel with piston and label, 20 per box

Part #: 46402 – 1L amber cartridge barrel with piston and label, 10 per box

Tip Caps

Part#: 43700, 46700

Tip caps protect BlueGrip workholding adhesive from light exposure.

Part #: 43700 – Use to cap 30 cc amber syringe barrel, 20 per box

Part #: 46700 – Use to cap 1L amber cartridge barrel, 10 per box

End Caps

Part#: 43800, 46802

End caps fit securely over syringe and cartridge tabs, and feature a center push button that makes it easy to create a snug, airtight seal.

Part #: 43800 – Use to cap 30 cc amber syringe barrel, 20 per box

Part #: 46802 – Use to cap 1L amber cartridge barrel, 10 per box

Barrel Loader

Part#: 46600

Barrel-filling system for BlueGrip workholding adhesive.

Features

• 1L cartridge reservoir.
• Includes stand with retainer block.
• Use to fill 30 cc syringes from a 1L cartridge.

Adhesive Dispenser

Part#: 71100

Adhesive dispenser to use in a manual or semi-automatic control mode.

Features

• Foot-operated adhesive dispenser.
• Two control modes: manual or semi-automatic.
• Minimum injection volume is 0.01 ml.
• Controlled by a timer.